GALILEO
The Galileo Energetic Particles Detector
Galileo EPD Handbook
Revised 2003-05, T. Hunt-Ward and T. P. Armstrong
Table of Contents
- Purposes of This Document and Preface
- Photos of the Energetic Particles Detector
- List of Figures
- List of Tables
-
Chapter 1. Instrument Summary
- Introduction
- Overview and System Summary
- Mechanical System Overview - Post-Challenger
- Mechanical System Overview - Pre-Challenger
- CMS Subsystem
-
LEMMS Subsystem Overview
- Mechanical - Geometrical Factors
- Numerical Calculation of Three-Dimensional Electron and Proton Trajectories in the Galileo EPD LEMMS Sensor Assembly, a technical report by Y. Wu, C. McKee, and T. P. Armstrong, Dec. 1986.
- Charged Particle Response of Magnetic Deflection System for Galileo Jupiter Orbiter, Y. Wu and T. P. Armstrong; draft of a paper later published in Nuclear Instruments and Methods in Physics Research, A265, 561, 1988.
- EPD Geometry Factors, R. W. McEntire, EPD Science Team Meeting, March 1998.
- Geometric Factor Calculation for the EPD LEMMS Telescope, A. Lagg, EPD Team Meeting, March 1998.
- Electronics
- Calibrations
- LEMMS Passbands
- Mechanical - Geometrical Factors
-
Data System
- Summary of Data System Information from 1992 Space Science Reviews Article
- Galileo EPD Telemetry Format
- EPD Telemetry Packet Formats
- Galileo EPD Log-Compression Algorithm
- Galileo EPD LEMMS PHA Spectrum Log-Compression Algorithm
- JPL Galileo Orbiter Flight Software Requirements for EPD
- EPD Housekeeping Functions
- EPD Command Density at Satellite Encounter
- Servicing the Galileo EPD Rate Channel Accumulators
- EPD Bus Commands
- Instrument Software Management Plan
- Stepping Motor Subsystem
- EPD Commands
- Chapter 2. EPD Software
-
EPD Flight Software System Documentation
- 1.0 Introduction
- 2.0 Software System Overview
- 3.0 Microprocessor System Overview
- 4.0 Telemetry Formatting
- 5.0 Rate Channel Processing
- 6.0 Pulse Height Analyzer
- 7.0 Housekeeping Data Processing
- 8.0 Alarm Status Monitoring
- 9.0 Synchronization
- 10.0 Command Processing
- 11.0 Scanning Motor System
- 12.0 Autocalibrator
- 13.0 EPD Memory Loads
- EPDProc
- Rational for New Format
- New EPD Format and Implementation
-
EPD SBand Mission Software Requirements
- Introduction
- Software Versions
- Science Background
- EPD Telemetry Output Rates
- EPD Rate Channel Data Processing
- Telemetry Output Buffers in the EPD Memory
- CDS Rate Channel to Bin Algorithm
- Rate Channel Array Compression
- CMS Pulse Height Analysis (PHA) Data
- CDS-EPD Interface Description
- CDS-Produced EPD Telemetry Record
- New EPD Software Tasks
- Telemetry Mode Change
- Motor Control Functions
- New EPD Command Functions
- Transition Mode Commands
- EPD Memory Storage Availability
- EPD Memory Map
- Appendix A: Buffer Storage for the EPD Rate Channel Bins
- Appendix B: EPD Accumulator Hardware Addresses
- Appendix C: EPD Software Patch Hook Values
- Appendix D: EPD Telemetry Mode Definition Blocks
- LGA Processor Status Memo
- LGA Processing Software for the EPD
-
EPD Flight Software System Documentation
- Appendices
Return to main
Galileo Table of Contents Page.
Return to Fundamental
Technologies Home Page.
Updated 8/23/19, Cameron Crane
QUICK FACTS
Manufacturer: The Galileo Spacecraft
was manufactured by the Jet Propulsion Laboratory,
Messerschmitt-Bölkow-Blohm, General Electric, and the
Hughes Aircraft Company.
Mission Duration: Galileo was planned to have a mission duration of around 8 years, but was kept in operation for 13 years, 11 months, and 3 days, until it was destroyed in a controlled impact with Jupiter on September 21, 2003.
Destination: Galileo's destination was Jupiter and its moons, which it orbitted for 7 years, 9 months, and 13 days.
Mission Duration: Galileo was planned to have a mission duration of around 8 years, but was kept in operation for 13 years, 11 months, and 3 days, until it was destroyed in a controlled impact with Jupiter on September 21, 2003.
Destination: Galileo's destination was Jupiter and its moons, which it orbitted for 7 years, 9 months, and 13 days.